This article addresses the top six problems people have with their brake system. Use this article to find out if it’s safe to drive your vehicle to your Utah brake repair company or if you should have it towed.

A major problem Utah brake repair shops face is squeaky brakes. A squeal may signify a brake problem. It may also be nothing at all and your brakes are functioning as they should. In this case, a gel can be applied to your brakes that will dampen the squeals.

Shaking felt while braking, especially in the steering wheel, is a common problem. Although it isn’t as serious as other problems, your braking performance will not be as efficient as it could be. This problem will require a bit more repair work compared to a normal brake pad change.

The ABS light came on. When the ABS light is on the ABS system is no longer working. Brakes will still function as normal without the ABS system, but be sure you know the method for stopping without ABS if you plan on driving on icy roads. You can drive to the shop.

ABS light – The ABS light on your car is alerting you to an issue with your Anti-Lock Brake System. You can drive your vehicle to the garage, but be aware that on wet or icy conditions you need to pay extra attention when you brake to avoid locking up your wheels.

Another issue that is brought to Utah brake repair shops is a mushy brake pedal. This could be due to air in the brake system or a leak. Do not drive your vehicle; have it towed to your Utah brake repair shop.

Mushy brake pedal – If the brake pedal goes all the way to the floor with little resistance you need to tow your vehicle to your Utah brake repair company. Do not attempt to drive or you may not be able to stop at all. Hard brake pedal – Check to see if anything has rolled under the brake pedal. If not, have your vehicle towed, don’t chance not being able to stop.

By following the advice given you can be rest assured that you will be able to travel safely. Don’t treat brake system issues casually or put off dealing with them. And if you’re not sure, the safe bet is to tow your vehicle.

Master Muffler is Utah’s leading muffler, brake and auto repair shop, and has 13 locations from Brigham City to Provo. Visit or call one of their locations for a free quote on how to improve your miles per gallon up to 30% for your car, truck or van. Visit their website at www.mastermuffler.net.

Sometimes the window motor makes the window open slowly, and sometimes it can stop working entirely. Whatever the reason, it can be annoying to have to deal with windows that do not work. Utah auto repair shops can quickly repair this problem, but if you know basic car skills this problem can be fixed by yourself.

To begin,see what is causing the malfunction. Find out what is causing it to stop working. Look at the switch and see if it is dirty. This can sometimes cause it to stop working correctly.

Check out the switches located on the driver’s side. Clean the dirty contact and see if that fixes the problem. If it still is not working, it could be because the motor has been worn out.

The easiest way to repair the motor without taking your car in to a Utah auto repair shop is to remove the door panel of the problem window. You may have to manually lower the window to find the bolts that are holding the regulator in place. Once the window is lowered it is usually easy to find the regulator, and remove the bolts holding it to the door.

You will probably need to manually lower the window and then find the bolts that are holding the regulator in place. After the window is lowered find the regulator and remove the bolts. Be sure to disconnect the wiring connected to the regulator before you remove the old regulator.

Regulators can be found at most Utah auto repair shops. Replace the old regulator with a working one. Make sure that everything is tightened and that all wires are in place where they need to be before closing the door panel.

Once everything is put back in order the power switch for the window should work again. Try it out to see if the problem is corrected. If it isn’t fixed, you can either take it apart and try again, or take it in to your Utah auto repair shop for repairs.

Car repair manuals are handy tools. They offer specific instructions for your car and how to correctly fix these types of issues. Utah auto repair shops are also great places to find specific tools you may need.

Master Muffler is Utah’s leading muffler, brake and auto repair shop, and has 13 locations from Brigham City to Provo. Visit or call one of their locations for a free quote on how to improve your miles per gallon up to 30% for your car, truck or van. Visit their website at www.mastermuffler.net.

Lately I’ve been hearing my brakes squeaking really bad and I was wondering if it is time to get them fixed or if it would be okay to oil them up. That got me thinking about how important it is to maintain your brakes in excellent condition. So after some research here are some of the things I put together about maintaining your brakes.

You should be regularly checking the brake fluid. You want to make sure that it has enough. Make sure that you are also using the most appropriate brake fluid for your car.

When you are inspecting your brake fluid, if you notice that it has changed colors or is now fairly milky, it is time to change. Brake fluid, if it has gone bad, can ruin your master cylinder, a major part of your brake system.

Some people choose to change their break fluid by themselves if they are very familiar with car, or you could just save yourself the effort by taking it to a local brake shop to get it done. If you haven’t done it before it can be a pretty meticulous job.

The first thing you are going to need to do if you change the brake fluid yourself is called brake bleeding. Brake bleeding is really a must to get rid of all the air bubbles that can build up in the lines.

If you don’t bleed your brakes, the air bubbles will start to build up and your brakes won’t perform as well. This is often referred to as soft or mushy pedal.

It is usually recommended for two people to be helping as your bleed your brakes. I have heard and read of ways that you can do it with only one person and some special bleeding tools, but it is a lot easier if another person there to help.

Another good way of keeping your brakes maintained is to be checking the rotors and pads. Compared to the last procedure this one is a lot easier because all you need to do is take off the tires. If you can see that your pads are wearing down so badly that you can barely see them, it is time to get your brakes changed.

By checking up on your brakes as well as other key parts on your car, you can end up saving a lot of money in the long run. Maintenance is also Important for safety.