With the failing economy and the falling wages of worker, perhaps the solution to giving your car a different look will be to give your car a complete new paint job. If the mechanics and the engine of the car is in good shape, but you do not fancy the car body, then painting it will be the ideal answer.

Its a fantastic money saver, but even more so if you do it yourself as opposed to having it professionally done up in the workshop. You can do it right if you study the basics and follow the instructions for car spray painting. It’s important though if you decide you are going to take on this project that you are ready to see it complete till the end.

First, you require a few supplies. These consist of:

-coverings to secure the unpainted areas and masking tape to hold these in place -a good car-wash detergent and brush as well as a wax/grease remover. -various grits of sandpaper -primers and paint that’s urethane base for the car spray painting -paint sprayer -safety tools example masks, goggles and protective clothing -knife and putty for fill ins.

One : You must make sure that you wash the car thoroughly to remove all grime and debris. If you don’t then these things will be set in with your paint, leaving a very frustrating look to the completed job. Follow up with a wax/grease remover so the paint you use for the car spray painting would adhere the right way.

Two : Remove whatever rough spots by sanding. Once this has been done be certain to rinse off any of the loose sandings. This’s where you will want to use the putty to fill in any small pit marks, that’re have been caused from stones for illustration.

Three : Do not get in too much of a rush to begin your car spray painting. The car must be completely dry so its best to leave it to do so for some hours. You could go ahead and cover any of the areas that your dont want to get paint on.

Four : Now you’re ready to begin with the primer. Dont skip this step, as it’ll give a much improved look to the finished project. It helps the paint to adhere the right way and allows for a more even finish. Next, once the primer is dry you’ll need to gently sand it down.

5 : You are eventually at the step youve been waiting for. Its time to apply the color for your car spray painting. Whether you have selected to use aerosol paints or a spray gun, the premise stays the same. Merely apply thin coats. Several would probably be essential. A Few light coats are much better than 1 thick coat. You will be able to tell just by looking at the car how many more coats of paint it’ll require. Several may just require 2 where as some others would need three or four.

Six : Eventually, down to the last step and thats applying the clear coat. This’s done precisely the same as the colored coats.

Now you can have a look at your personalized car spraying.

No Comments »

No comments yet.

RSS feed for comments on this post. TrackBack URL

Leave a comment